# Configuration file for OpenSC
# Example configuration file

# NOTE: All key-value pairs must be terminated by a semicolon.

# Default values for any application
# These can be overridden by an application
# specific configuration block.
app default {
	# Amount of debug info to print
	#
	# A greater value means more debug info.
	# Default: 0
	#
	#debug = 3;

	# The file to which debug output will be written
	#
	# Special values 'stdout' and 'stderr' are recognized.
	# Default: stderr
	#
	# debug_file = /tmp/opensc-debug.log

	# PKCS#15 initialization / personalization
	# profiles directory for pkcs15-init.
	# Default: /usr/share/opensc
	#
	# profile_dir = /usr/share/opensc;

	# Disable pop-ups of built-in GUI
	#
	# Default: false
	# disable_popups = true;

	# Enable default card driver
	# Default card driver is explicitly enabled for the 'opensc-explorer' and 'opensc-tool'.
	#
	# Default: false
	# enable_default_driver = true;

	# List of readers to ignore
	# If any of the strings listed below is matched in a reader name (case
	# sensitive, partial matching possible), the reader is ignored by OpenSC.
	# Use `opensc-tool --list-readers` to see all currently connected readers.
	#
	# Default: empty
	# ignored_readers = "CardMan 1021", "SPR 532";

	# CT-API module configuration.
	reader_driver ctapi {
		# module /usr/lib/libtowitoko.so {
			# CT-API ports:
			# 0..3		COM1..4
			# 4		Printer
			# 5		Modem
			# 6..7		LPT1..2
			# ports = 0;
		# }
	}

	# The following section shows definitions for PC/SC readers.
	reader_driver pcsc {
		# Limit command and response sizes. Some Readers don't propagate their
		# transceive capabilities correctly. max_send_size and max_recv_size
		# allow setting the limits manually, for example to enable extended
		# length capabilities.
		# Default: max_send_size = 255, max_recv_size = 256;
		# max_send_size = 65535;
		# max_recv_size = 65536;
		#
		# Connect to reader in exclusive mode?
		# Default: false
		# connect_exclusive = true;
		#
		# What to do when disconnecting from a card (SCardDisconnect)
		# Valid values: leave, reset, unpower.
		# Default: leave
		# disconnect_action = reset;
		#
		# What to do at the end of a transaction (SCardEndTransaction)
		# Valid values: leave, reset, unpower.
		# Default: leave
		# transaction_end_action = reset;
		#
		# What to do when reconnection to a card (SCardReconnect)
		# Valid values: leave, reset, unpower.
		# Note that this affects only the internal reconnect (after a SCARD_W_RESET_CARD).
		# A forced reset via sc_reset() always does a full powerup.
		# Default: leave
		# reconnect_action = reset;
		#
		# Enable pinpad if detected (PC/SC v2.0.2 Part 10)
		# Default: true
		# enable_pinpad = false;
		#
		# Some pinpad readers can only handle one exact length of the PIN.
		# fixed_pinlength sets this value so that OpenSC expands the padding to
		# this length.
		# Default: 0 (i.e. not fixed)
		# fixed_pinlength = 6;
		#
		# Detect reader capabilities with escape commands (wrapped APDUs with
		# CLA=0xFF as defined by PC/SC pt. 3 and BSI TR-03119, e.g. for getting
		# the UID, escaped PIN commands and the reader's firmware version)
		# Default: false
		# enable_escape = true;
		#
		# Use specific pcsc provider.
		# Default: libpcsclite.so.1
		# provider_library = libpcsclite.so.1
	}

	# Options for OpenCT support
	reader_driver openct {
		# Virtual readers to allocate.
		# Default: 2
		# readers = 5;
		#
		# Limit command and response sizes.
		# Default: n/a
		# max_send_size = 255;
		# max_recv_size = 256;
	}

	# Options for CryptoTokenKit support
	reader_driver cryptotokenkit {
		# Limit command and response sizes. Some Readers don't propagate their
		# transceive capabilities correctly. max_send_size and max_recv_size
		# allow setting the limits manually, for example to enable extended
		# length capabilities.
		# Default: autodetect
		# max_send_size = 65535;
		# max_recv_size = 65536;
	}

	# Allowlist of card drivers to load at start-up
	#
	# The supported internal card driver names can be retrieved
	# from the output of:
	# $ opensc-tool --list-drivers
	#
	# A special value of 'old' will load all
	# statically linked drivers that may be removed in the future.
	#
	# A special value of 'internal' will load all
	# statically linked drivers. If an unknown (i.e. not
	# internal) driver is supplied, a separate configuration
	# configuration block has to be written for the driver.
	# Default: internal
	# NOTE: When "internal" keyword is used, must be last entry
	#
	#card_drivers = old, internal;

	# Card driver configuration blocks.

	# For card drivers loaded from an external shared library/DLL,
	# you need to specify the path name of the module
	#
	# card_driver customcos {
		# The location of the driver library
		# module = /usr/lib/libcard_customcos.so;
	# }

	card_driver npa {
		# German ID card requires the CAN to be verified before QES PIN. This,
		# however, is not part of the PKCS#15 profile of the card. So for
		# verifying the QES PIN we actually need both. The CAN may be given
		# here. If the CAN is not given here, it will be prompted on the
		# command line or on the reader (depending on the reader's
		# capabilities).
		#
		#can = 222222;

		# QES is only possible with a Comfort Reader (CAT-K), which holds a
		# cryptographic key to authenticate itself as signature terminal (ST).
		# We usually will use the reader's capability to sign the data.
		# However, during development you may specify soft certificates and
		# keys for a ST below.
		# The following example EAC PKI can be found in vicc's example data:
		# https://github.com/frankmorgner/vsmartcard/tree/master/virtualsmartcard/npa-example-data
		#
		#st_dv_certificate = ZZSTDVCA00001.cvcert;
		#st_certificate = ZZSTTERM00001.cvcert;
		#st_key = ZZSTTERM00001.pkcs8;
	}

	# Configuration block for DNIe
	#
	# Card DNIe has an option to show an extra warning before
	# issuing a signature.

	card_driver dnie {
		# Disable / enable warning message when performing a
		# signature operation with the DNIe.
		# Only used if compiled with --enable-dnie-ui
		# user_consent_enabled = yes;

		# Specify the pinentry application to use if warning
		# is configured to be displayed using pinentry.
		# Default: /usr/bin/pinentry
		# Only used if compiled with --enable-dnie-ui
		# user_consent_app = "/usr/bin/pinentry";
	}

	card_driver edo {
		# CAN is required to establish connection
		# with the card. It might be overridden by
		# EDO_CAN environment variable. Currently,
		# it is not possible to set it in any other way.
		#
		#can = 123456;
	}

	# In addition to the built-in list of known cards in the
	# card driver, you can configure a new card for the driver
	# using the card_atr block. The goal is to centralize
	# everything related to a certain card to card_atr.
	#
	# The supported internal card driver names can be retrieved
	# from the output of:
	# $ opensc-tool --list-drivers

	# Generic format: card_atr <hex encoded ATR (case-sensitive!)>

	# New card entry for the flex card driver
	# card_atr 3b:f0:0d:ca:fe {
		# All parameters for the context are
		# optional unless specified otherwise.

		# Context: global, card driver
		#
		# ATR mask value
		#
		# The mask is logically AND'd with an
		# card ATR prior to comparison with the
		# ATR reference value above. Using mask
		# allows identifying and configuring
		# multiple ATRs as the same card model.
		# atrmask = "ff:ff:ff:ff:ff";

		# Context: card driver
		#
		# Specify used card driver (REQUIRED).
		#
		# When enabled, overrides all possible
		# settings from the card drivers built-in
		# card configuration list.
		# driver = "flex";

		# Set card name for card drivers that allows it.
		# name = "My CryptoFlex card";

		# Card type as an integer value.
		#
		# Depending on card driver, this allows
		# tuning the behaviour of the card driver
		# for your card.
		# type = "2002";

		# Card flags as an hex value.
		# Multiple values are OR'd together.
		#
		# Depending on card driver, this allows
		# fine-tuning the capabilities in
		# the card driver for your card.
		#
		# Optionally, some known parameters
		# can be specified as strings:
		#
		# rng - On-board random number source
		# keep_alive - Request the card driver to send a "keep alive" command before each transaction to make sure that the required applet is still selected.
		#
		# flags = "rng", "keep_alive", "0x80000000";

		#
		# Context: PKCS#15 emulation layer
		#
		# When using PKCS#15 emulation, force
		# the emulation driver for specific cards.
		#
		# Required for external drivers, but can
		# be used with built-in drivers, too.
		# pkcs15emu = "custom";

		#
		# Context: reader driver
		#
		# Force protocol selection for specific cards.
		# Known parameters: t0, t1, raw
		# force_protocol = "t0";

		# Context: minidriver
		#
		# read_only: Mark card as read/only card in Minidriver/BaseCSP interface (Default: false)
		# md_supports_X509_enrollment: Indicate X509 enrollment support at Minidriver/BaseCSP interface (Default: false)
		# md_guid_as_id: Use the GUID generated for the key as id in the PKCS#15 structure (Default: false, i.e. auto generated)
		# md_guid_as_label: Use the GUID generated for the key as label in the PKCS#15 structure (Default: false, i.e. no label set)
		# md_supports_container_key_gen: Card allows generating key pairs on the card (Default: false)
		# md_supports_container_key_import: Card allows importing private keys (Default: false)
		#
		# Window title of the PIN pad dialog
		# Default: "Windows Security"
		# md_pinpad_dlg_title = "Title";
		#
		# Filename of the icon for the PIN pad dialog; use "" for no icon
		# Default: Built-in smart card icon
		# md_pinpad_dlg_icon = "";
		#
		# Main instruction of the PIN pad dialog
		# Default: "OpenSC Smart Card Provider"
		# md_pinpad_dlg_main = "Main";
		#
		# Content of the PIN pad dialog for role "user"
		# Default: "Please verify your fingerprint or PIN on the card."
		# md_pinpad_dlg_content_user = "Content User";
		#
		# Content of the PIN pad dialog for role "user+signature"
		# Default: "Please verify your fingerprint or PIN for the digital signature PIN on the card."
		# md_pinpad_dlg_content_user_sign = "Content User+Sign";
		#
		# Content of the PIN pad dialog for role "admin"
		# Default: "Please enter your PIN to unblock the user PIN on the PINPAD."
		# md_pinpad_dlg_content_admin = "Content Admin";
		#
		# Expanded information of the PIN pad dialog
		# Default: "This window will be closed automatically after the PIN has been submitted on the PINPAD (timeout typically after 30 seconds)."
		# md_pinpad_dlg_expanded = "Expanded Information";
		#
		# Allow the user to cancel the PIN pad dialog by not immediately requesting the PIN on the PIN pad
		# Default: false
		# md_pinpad_dlg_enable_cancel = true;
		#
		# Content of the verification of the PIN pad dialog
		# Default: "Automatically request PIN immediately on PIN-Pad"
		# md_pinpad_dlg_verification = "Verification";
		#
		# Time in seconds for the progress bar of the PIN pad dialog to tick. "0" removes the progress bar.
		# Default: 30
		# md_pinpad_dlg_timeout = 0;

		# Notification title and text when card was inserted
		# Default: "Smart card detected"
		# notify_card_inserted = "inserted title";
		# Default: ATR of the card
		# notify_card_inserted_text = "inserted text";
		#
		# Notification title and text when card was removed
		# Default: "Smart card removed"
		# notify_card_removed = "card removed";
		# Default: Name of smart card reader
		# notify_card_removed_text = "removed text";
		#
		# Notification title and text when PIN was verified
		# Default: "PIN verified"
		# notify_pin_good = "good PIN";
		# Default: "Smart card is unlocked"
		# notify_pin_good_text = "good text";
		#
		# Notification title and text when PIN was wrong
		# Default: "PIN not verified"
		# notify_pin_bad = "bad PIN";
		# Default: "Smart card is locked"
		# notify_pin_bad_text = "bad text";
	# }

	# Yubikey is known to have the PIV applet and the OpenPGP applet. OpenSC
	# can handle both to access keys and certificates, but only one at a time.
	card_atr 3b:f8:13:00:00:81:31:fe:15:59:75:62:69:6b:65:79:34:d4 {
		name = "Yubikey 4";
		# Select the PKI applet to use ("PIV-II" or "openpgp")
		driver = "PIV-II";
		# Recover from other applications accessing a different applet
		flags = "keep_alive";
	}
	card_atr 3b:fc:13:00:00:81:31:fe:15:59:75:62:69:6b:65:79:4e:45:4f:72:33:e1 {
		name = "Yubikey Neo";
		# Select the PKI applet to use ("PIV-II" or "openpgp")
		driver = "PIV-II";
		# Recover from other applications accessing a different applet
		flags = "keep_alive";
	}
	card_atr 3b:8c:80:01:59:75:62:69:6b:65:79:4e:45:4f:72:33:58 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:00:00";
		name = "Yubikey Neo";
		# Select the PKI applet to use ("PIV-II" or "openpgp")
		driver = "PIV-II";
		# Recover from other applications accessing a different applet
		flags = "keep_alive";
	}

	# Oberthur's AuthentIC v3.2.2
	card_atr 3B:DD:18:00:81:31:FE:45:80:F9:A0:00:00:00:77:01:00:70:0A:90:00:8B {
		type = 11100;
		driver = "authentic";
		name = "AuthentIC v3.1";

		# Name of SM configuration sub-section
		# secure_messaging = local_authentic;
	}

	# IAS/ECC cards
	card_atr 3B:7F:96:00:00:00:31:B9:64:40:70:14:10:73:94:01:80:82:90:00 {
		type = 25001;
		driver = "iasecc";
		name = "Gemalto MultiApp IAS/ECC v1.0.1";
		secure_messaging = local_gemalto_iam;
		# secure_messaging = local_adele;
		read_only = false;
		md_supports_X509_enrollment = true;
	}
	card_atr 3B:7F:96:00:00:00:31:B8:64:40:70:14:10:73:94:01:80:82:90:00 {
		type = 25001;
		driver = "iasecc";
		name = "Gemalto MultiApp IAS/ECC v1.0.1";
		secure_messaging = local_gemalto_iam;
		read_only = false;
		md_supports_X509_enrollment = true;
	}
	#card_atr 3B:DD:18:00:81:31:FE:45:80:F9:A0:00:00:00:77:01:08:00:07:90:00:FE {
	#	type = 25002;
	#	driver = "iasecc";
	#	name = "Oberthur IAS/ECC v1.0.1";
	#	# No 'admin' application for this card -- no secure messaging
	#}
	#card_atr 3B:7F:18:00:00:00:31:B8:64:50:23:EC:C1:73:94:01:80:82:90:00 {
	#	type = 25003;
	#	driver = "iasecc";
	#	name = "Morpho YpsID S3 IAS/ECC";
	#	# secure_messaging = local_morpho_YpsID_S3;
	#}
	#card_atr 3B:DF:96:00:80:31:FE:45:00:31:B8:64:04:1F:EC:C1:73:94:01:80:82:90:00:EC {
	#	type = 25005;
	#	driver = "iasecc";
	#	name = "Morpho MI IAS/ECC v1.0.1";
	#	read_only = false;
	#	md_supports_X509_enrollment = true;
	#	secure_messaging = local_morpho_mi;
	#}
	card_atr 3B:DF:18:FF:81:91:FE:1F:C3:00:31:B8:64:0C:01:EC:C1:73:94:01:80:82:90:00:B3 {
		type = 25004;
		driver = "iasecc";
		name = "Amos IAS/ECC v1.0.1";
		read_only = false;
		md_supports_X509_enrollment = true;
		secure_messaging = local_amos;
	}
	card_atr 3B:DC:18:FF:81:91:FE:1F:C3:80:73:C8:21:13:66:01:0B:03:52:00:05:38 {
		type = 25004;
		driver = "iasecc";
		name = "Amos IAS/ECC v1.0.1";
		read_only = false;
		md_supports_X509_enrollment = true;
		secure_messaging = local_amos_eid;
	}

	# SmartCard-HSM with contact-based interface or USB-Stick
	card_atr 3B:FE:18:00:00:81:31:FE:45:80:31:81:54:48:53:4D:31:73:80:21:40:81:07:FA {
		driver = "sc-hsm";
		read_only = false;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
	}

	# SmartCard-HSM with contact-less interface
	card_atr 3B:8E:80:01:80:31:81:54:48:53:4D:31:73:80:21:40:81:07:18 {
		driver = "sc-hsm";
		read_only = false;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
	}

	# SmartCard-HSM 4k with contact-based interface or USB-Stick
	card_atr 3b:de:18:ff:81:91:fe:1f:c3:80:31:81:54:48:53:4d:31:73:80:21:40:81:07:1c {
		driver = "sc-hsm";
		read_only = false;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
	}

	# SmartCard-HSM with fingerprint sensor and PIN pad
	card_atr 3B:80:80:01:01 {
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}

	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:84:80:01:47:6f:49:44:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}
	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:85:80:01:47:6f:49:44:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}
	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:86:80:01:47:6f:49:44:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}
	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:87:80:01:47:6f:49:44:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}
	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:88:80:01:47:6f:49:44:00:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}
	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:89:80:01:47:6f:49:44:00:00:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}
	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:8A:80:01:47:6f:49:44:00:00:00:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}
	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:8B:80:01:47:6f:49:44:00:00:00:00:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}
	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:8C:80:01:47:6f:49:44:00:00:00:00:00:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00:00:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}

	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:8D:80:01:47:6f:49:44:00:00:00:00:00:00:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00:00:00:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}

	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:8E:80:01:47:6f:49:44:00:00:00:00:00:00:00:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00:00:00:00:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}

	# GoID with fingerprint sensor and PIN pad
	card_atr 3B:8F:80:01:47:6f:49:44:00:00:00:00:00:00:00:00:00:00:00:00 {
		atrmask = "FF:FF:FF:FF:FF:FF:FF:FF:00:00:00:00:00:00:00:00:00:00:00:00";
		driver = "sc-hsm";
		force_protocol = "t1";
		read_only = true;
		md_supports_X509_enrollment = true;
		md_supports_container_key_gen = true;
		md_guid_as_label = true;
		md_pinpad_dlg_main = "Fingerabdruck oder PIN eingeben";
		md_pinpad_dlg_content_user = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN auf der Karte.";
		md_pinpad_dlg_content_user_sign = "Bitte verifizieren Sie Ihren Fingarabdruck oder Ihre PIN für die digitale Signatur auf der Karte.";
		md_pinpad_dlg_content_admin = "Bitte geben Sie Ihre PIN zum Entsperren der Nutzer-PIN auf dem PIN-Pad ein.";
		md_pinpad_dlg_expanded = "Dieses Fenster wird automatisch geschlossen, wenn die PIN oder der Fingerabdruck verifiziert wurde (Timeout nach 30 Sekunden). Nutzen Sie das PIN-Pad, um die Eingabe abzubrechen.";
		md_pinpad_dlg_timeout = 30;
		notify_card_inserted = "GoID erkannt";
		notify_card_inserted_text = "";
		notify_card_removed = "GoID entfernt";
		notify_pin_good = "Fingerabdruck bzw. PIN verifiziert";
		notify_pin_good_text = "GoID ist entsperrt";
		notify_pin_bad = "Fingerabdruck bzw. PIN nicht verifiziert";
		notify_pin_bad_text = "GoID ist gesperrt";
	}

	secure_messaging local_authentic  {
		# name of external SM module
		# module_name = libsmm-local.so;
		# directory with external SM module
		# Default: /usr/lib
		# module_path = /usr/lib;

		# specific data to tune the module initialization
		# module_data = "Here can be your SM module init data";

		# SM mode:
		# 'transmit' -- in this mode the procedure to securize an APDU is called by the OpenSC general
		#	       APDU transmit procedure.
		#		In this mode all APDUs, except the ones filtered by the card specific procedure,
		#	       are securized.
		# 'acl' -- in this mode APDU are securized only if needed by the ACLs of the command to be executed.
		#
		#mode = transmit;

		# SM type specific flags
		# flags = 0x78;	   # 0x78 -- level 3, channel 0

		# Default KMC of the GP Card Manager for the Oberthur's Java cards
		# kmc = "00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00";
	}

	secure_messaging local_gemalto_iam  {
		module_name = libsmm-local.so;
		# module_path = /usr/lib;
		# module_data = "";
		type = acl;	     # transmit, acl

		ifd_serial = "11:22:33:44:55:66:77:88";

		# Keyset values from IAM profiles of the Gemalto IAS/ECC cards
		keyset_02_enc = "RW_PRIV_ENC_TEST";
		keyset_02_mac = "RW_PRIV_MAC_TEST";

		keyset_E828BD080FD2504543432D654944_01_enc = "RO_ENC_TEST_KEY_";
		keyset_E828BD080FD2504543432D654944_01_mac = "RO_MAC_TEST_KEY_";

		keyset_E828BD080FD2504543432D654944_03_enc = "RW_PUBL_ENC_TEST";
		keyset_E828BD080FD2504543432D654944_03_mac = "RW_PUBL_MAC_TEST";
	}

	secure_messaging local_amos  {
		module_name = libsmm-local.so;
		# module_path = /usr/lib;
		# module_data = "";
		mode = acl;
		ifd_serial = "11:22:33:44:55:66:77:88";
		keyset_02_enc = "ENCROECHANTILLON";
		keyset_02_mac = "MACROECHANTILLON";
	}

	secure_messaging local_amos_eid  {
		module_name = libsmm-local.so;
		# module_path = /usr/lib;
		# module_data = "";
		mode = acl;
		ifd_serial = "11:22:33:44:55:66:77:88";
		keyset_E828BD080FD2504543432D654944_03_enc = "RW_PUBL_ENC_TEST";
		keyset_E828BD080FD2504543432D654944_03_mac = "RW_PUBL_MAC_TEST";
	}

	secure_messaging local_adele  {
		module_name = libsmm-local.so;
		# module_path = /usr/lib;
		# module_data = "";
		type = acl;	     # transmit, acl

		ifd_serial = "11:22:33:44:55:66:77:88";

		# Keyset values from 'Adele' profiles of the IAS/ECC cards
		keyset_01_enc = "EMENCECHANTILLON";
		keyset_01_mac = "EMMACECHANTILLON";

		keyset_02_enc = "AAENCECHANTILLON";
		keyset_02_mac = "AAMACECHANTILLON";

		keyset_E828BD080FD2500000040301_02_enc = "E2ENCECHANTILLON";
		keyset_E828BD080FD2500000040301_02_mac = "E2MACECHANTILLON";

		keyset_D2500000044164E86C650101_02_enc = "E1ENCECHANTILLON";
		keyset_D2500000044164E86C650101_02_mac = "E1MACECHANTILLON";

		keyset_D2500000044164E86C650101_03_enc = "SIENCECHANTILLON";
		keyset_D2500000044164E86C650101_03_mac = "SIMACECHANTILLON";
	}

	# Below are the framework specific configuration blocks.

	# PKCS #15
	framework pkcs15 {
		# Whether to use the cache files in the user's
		# home directory.
		#
		# Note: If caching is done by a system process, caching may be placed
		# inaccessible from the user account. Use a global caching directory if
		# you wish to share the cached information.
		#
		# Default: no
		# use_file_caching = public;
		#
		# set a path for caching
		# so you do not use the env variables and for pam_pkcs11
		# (with certificate check)  where $HOME is not set
		# Default: path in user home
		# file_cache_dir = /var/lib/opensc/cache

		# Use PIN caching?
		# Default: true
		# use_pin_caching = false;
		#
		# How many times to use a PIN from cache before re-authenticating it?
		# Default: 10
		# pin_cache_counter = 3;
		#
		# Older PKCS#11 applications not supporting CKA_ALWAYS_AUTHENTICATE
		# may need to set this to get signatures to work with some cards.
		# Default: false
		# It is recommended to enable also use_pin_caching to allow OpenSC
		# to pass the pin to the card when needed.
		# pin_cache_ignore_user_consent = true;

		# How to handle a PIN-protected certificate
		# Valid values: protect, declassify, ignore.
		# Default: ignore in tokend, protect otherwise
		# private_certificate = declassify;

		# Enable pkcs15 emulation.
		# Default: yes
		# enable_pkcs15_emulation = no;
		#
		# Prefer pkcs15 emulation code before
		# the normal pkcs15 processing.
		# Some cards (like esteid and pteid) work in emu-only mode,
		# and do not depend on this option.
		#
		# Default: no
		# try_emulation_first = yes;

		# Enable builtin emulators.
		# Default: yes
		# enable_builtin_emulation = no;
		#
		# List of the builtin pkcs15 emulators to test
		# Special value of 'internal' will try all not disabled builtin pkcs15 emulators.
		# Special value of 'old' will try all disabled pkcs15 emulators. 
		# Default: internal;
		# builtin_emulators = old, internal;

		# additional settings per driver
		#
		# For pkcs15 emulators loaded from an external shared
		# library/DLL, you need to specify the path name of the module
		# and customize the card_atr example above correctly.
		#
		# emulate custom {
			# The location of the driver library
			# module = /usr/lib/libp15emu_custom.so;
		# }

		# Enable initialization and card recognition in PKCS#11 layer.
		# Default: no
		# pkcs11_enable_InitToken = yes;

		# some additional application parameters:
		# - type (generic, protected) used to distinguish the common access application
		#   and application for which authentication to perform some operation cannot be
		#   obtained with the common procedures (ex. object creation protected by secure messaging).
		#   Used by PKCS#11 module configured to expose restricted number of slots.
		#   (for ex. configured to expose only User PIN slot, User and Sign PINs slots, ...)
		#
		# - disable: do not expose application in PKCS15 framework
		#            default 'false'
		application E828BD080FD25047656E65726963 {
			type = generic;
			model = "ECC Generic PKI";
			# disable = true
		}

		application E828BD080FD2500000040301 {
			type = generic;
			model = "Adèle Générique";
		}

		application E828BD080FD2504543432D654944 {
			type = protected;
			model = "ECC eID";
		}

		application E828BD080FD2500000040201 {
			type = protected;
			model = "Adèle Admin-2";
		}
	}
}

# Parameters for the OpenSC PKCS11 module
app opensc-pkcs11 {
	pkcs11 {
		# Maximum Number of virtual slots.
		# If there are more slots than defined here,
		# the remaining slots will be hidden from PKCS#11.
		# Default: 16
		# max_virtual_slots = 32;

		# Maximum number of slots per smart card.
		# If the card has fewer keys than defined here,
		# the remaining number of slots will be empty.
		# Default: 4
		# slots_per_card = 2;

		# (max_virtual_slots/slots_per_card) limits the number of readers
		# that can be used on the system. Default is then 16/4=4 readers.

		# By default, the OpenSC PKCS#11 module will not lock your card
		# once you authenticate to the card via C_Login.
		#
		# Thus the other users or other applications is not prevented
		# from connecting to the card and perform crypto operations
		# (which may be possible because you have already authenticated
		# with the card). This setting is not very secure.
		#
		# Also, if your card is not locked, you can enconter problems
		# due to limitation of the OpenSC framework, that still is not
		# thoroughly tested in the multi threads environment.
		#
		# Your settings will be more secure if you choose to lock your
		# card. Nevertheless this behavior is a known violation of PKCS#11
		# specification. Now once one application has started using your
		# card with C_Login, no other application can use it, until
		# the first is done and calls C_Logout or C_Finalize. In the case
		# of many PKCS#11 application this does not happen until you exit
		# the application.
		# Thus it is impossible to use several smart card aware applications
		# at the same time, e.g. you cannot run both Firefox and Thunderbird at
		# the same time, if both are configured to use your smart card.
		#
		# Default: false
		# lock_login = true;

		# By default, interacting with the OpenSC PKCS#11 module may change the
		# state of the token, e.g. whether a user is logged in or not.
		#
		# Thus other users or other applications may change or use the state of
		# the token unknowingly. Other applications may create signatures
		# abusing an existing login or they may logout unnoticed.
		#
		# With this setting enabled the login state of the token is tracked and
		# cached (including the PIN). Every transaction is preceded by
		# restoring the login state.  After every transaction a logout is
		# performed. This setting by default also enables `lock_login` (see
		# above) to disable access for other applications during the atomic
		# transactions.
		#
		# Please note that any PIN-pad should be disabled (see `enable_pinpad`
		# above), because the user would have to input his PIN for every
		# transaction.
		#
		# Default: false
		# atomic = true;

		# With this setting disabled, the OpenSC PKCS#11 module will initialize
		# the slots available when the application calls `C_GetSlotList`. With
		# this setting enabled, the slots will also get initialized when
		# C_GetSlotInfo is called.
		#
		# This setting is a workaround for Java which does not call
		# `C_GetSlotList` when configured with a static `slot` instead of
		# `slotListIndex`.
		#
		# Default: true
		# init_sloppy = false;

		# User PIN unblock style
		#    none:  PIN unblock is not possible with PKCS#11 API;
		#    set_pin_in_unlogged_session:  C_SetPIN() in unlogged session:
		#       PUK is passed as the 'OldPin' argument of the C_SetPIN() call.
		#    set_pin_in_specific_context:  C_SetPIN() in the CKU_SPECIFIC_CONTEXT logged session:
		#       PUK is passed as the 'OldPin' argument of the C_SetPIN() call.
		#    init_pin_in_so_session:  C_InitPIN() in CKU_SO logged session:
		#       User PIN 'UNBLOCK' is protected by SOPIN. (PUK == SOPIN).
		#       # Actually this style works only for the PKCS15 contents without SOPIN.
		#       # For those with SOPIN, this mode will be useful for the cards without
		#       #   modes 00 and 01 of ISO command 'RESET RETRY COUNTER'. --vt
		#
		# Default: none
		# user_pin_unblock_style = set_pin_in_unlogged_session;

		# Create slot for unblocking PIN with PUK
		# This way PKCS#11 API can be used to login with PUK and
		# change a PIN.
		# Warning: causes problems with some applications like
		# firefox and thunderbird. Thus turned off by default
		#
		# Default: false
		# create_puk_slot = true;

		# Symbolic names of PINs for which slots are created
		# Card can contain more then one PINs or more then one on-card application with
		#   its own PINs. Normally, to access all of them with the PKCS#11 API a slot has to be
		#   created for all of them. Many slots could be ennoying for some of widely used application,
		#   like FireFox. This configuration parameter allows one to select the PIN(s)
		#   for which PKCS#11 slot will be created.
		# Actually recognised following symbolic names:
		#  'user', 'sign', 'all'
		# Only PINs initialised, non-SoPIN, non-unblocking are associated with symbolic name.
		# 'user' is identified as first global or first local PIN.
		# 'sign' is identified as second PIN: first local, second global or second local.
		# 'all' slot created for all non-sopin, non-unblocking PINs,
		#   optionally for PUK (see option 'create_puk_slot')
		#
		# Default: all
		# create_slots_for_pins = "user,sign";
		# create_slots_for_pins = "sign";
		#
		# For the module to simulate the opensc-onepin module behavior the following option
		# must be set:
		# create_slots_for_pins = "user"
	}
}

app onepin-opensc-pkcs11 {
	pkcs11 {
		slots_per_card = 1;
	}
}

# Used by OpenSC.tokend on Mac OS X only
app tokend {
	# The file to which debug log will be written
	# Default: /tmp/opensc-tokend.log
	#
	# debug_file = /Library/Logs/OpenSC.tokend.log

	framework tokend {
		# Score for OpenSC.tokend
		# The tokend with the highest score shall be used.
		# Default: 300
		#
		# score = 10;

		# Tokend ignore to read PIN protected certificate that is set SC_PKCS15_CO_FLAG_PRIVATE flag.
		# Default: true
		#
		# ignore_private_certificate = false;
	}
}

# Used by OpenSC minidriver on Windows only
app cardmod {
}