An ENet host for communicating with peers. More...

#include <enet.h>

Data Fields
ENetAddress	address
	Internet address of the host. More...

size_t	bandwidthLimitedPeers

enet_uint32	bandwidthThrottleEpoch

size_t	bufferCount

ENetBuffer	buffers [(1+2 *ENET_PROTOCOL_MAXIMUM_PACKET_COMMANDS)]

size_t	channelLimit
	maximum number of channels allowed for connected peers More...

ENetChecksumCallback	checksum
	callback the user can set to enable packet checksums for this host More...

size_t	commandCount

ENetProtocol	commands [ENET_PROTOCOL_MAXIMUM_PACKET_COMMANDS]

ENetCompressor	compressor

size_t	connectedPeers

int	continueSending

ENetList	dispatchQueue

size_t	duplicatePeers
	optional number of allowed peers from duplicate IPs, defaults to ENET_PROTOCOL_MAXIMUM_PEER_ID More...

enet_uint16	headerFlags

enet_uint32	incomingBandwidth
	downstream bandwidth of the host More...

ENetInterceptCallback	intercept
	callback the user can set to intercept received raw UDP packets More...

size_t	maximumPacketSize
	the maximum allowable packet size that may be sent or received on a peer More...

size_t	maximumWaitingData
	the maximum aggregate amount of buffer space a peer may use waiting for packets to be delivered More...

enet_uint32	mtu

enet_uint32	outgoingBandwidth
	upstream bandwidth of the host More...

enet_uint8	packetData [2][ENET_PROTOCOL_MAXIMUM_MTU]

size_t	packetSize

size_t	peerCount
	number of peers allocated for this host More...

ENetPeer *	peers
	array of peers allocated for this host More...

enet_uint32	randomSeed

int	recalculateBandwidthLimits

ENetAddress	receivedAddress

enet_uint8 *	receivedData

size_t	receivedDataLength

enet_uint32	serviceTime

ENetSocket	socket

enet_uint32	totalReceivedData
	total data received, user should reset to 0 as needed to prevent overflow More...

enet_uint32	totalReceivedPackets
	total UDP packets received, user should reset to 0 as needed to prevent overflow More...

enet_uint32	totalSentData
	total data sent, user should reset to 0 as needed to prevent overflow More...

enet_uint32	totalSentPackets
	total UDP packets sent, user should reset to 0 as needed to prevent overflow More...

Detailed Description

An ENet host for communicating with peers.

No fields should be modified unless otherwise stated.

See also: enet_host_create(); enet_host_destroy(); enet_host_connect(); enet_host_service(); enet_host_flush(); enet_host_broadcast(); enet_host_compress(); enet_host_compress_with_range_coder(); enet_host_channel_limit(); enet_host_bandwidth_limit(); enet_host_bandwidth_throttle()

Field Documentation

◆ address

ENetAddress ENetHost::address

Internet address of the host.

◆ bandwidthLimitedPeers

size_t ENetHost::bandwidthLimitedPeers

◆ bandwidthThrottleEpoch

enet_uint32 ENetHost::bandwidthThrottleEpoch

◆ bufferCount

size_t ENetHost::bufferCount

◆ buffers

ENetBuffer ENetHost::buffers[(1+2 *ENET_PROTOCOL_MAXIMUM_PACKET_COMMANDS)]

◆ channelLimit

size_t ENetHost::channelLimit

maximum number of channels allowed for connected peers

◆ checksum

ENetChecksumCallback ENetHost::checksum

callback the user can set to enable packet checksums for this host

◆ commandCount

size_t ENetHost::commandCount

◆ commands

ENetProtocol ENetHost::commands[ENET_PROTOCOL_MAXIMUM_PACKET_COMMANDS]

◆ compressor

ENetCompressor ENetHost::compressor

◆ connectedPeers

size_t ENetHost::connectedPeers

◆ continueSending

int ENetHost::continueSending

◆ dispatchQueue

ENetList ENetHost::dispatchQueue

◆ duplicatePeers

size_t ENetHost::duplicatePeers

optional number of allowed peers from duplicate IPs, defaults to ENET_PROTOCOL_MAXIMUM_PEER_ID

◆ headerFlags

enet_uint16 ENetHost::headerFlags

◆ incomingBandwidth

enet_uint32 ENetHost::incomingBandwidth

downstream bandwidth of the host

◆ intercept

ENetInterceptCallback ENetHost::intercept

callback the user can set to intercept received raw UDP packets

◆ maximumPacketSize

size_t ENetHost::maximumPacketSize

the maximum allowable packet size that may be sent or received on a peer

◆ maximumWaitingData

size_t ENetHost::maximumWaitingData

the maximum aggregate amount of buffer space a peer may use waiting for packets to be delivered

◆ mtu

enet_uint32 ENetHost::mtu

◆ outgoingBandwidth

enet_uint32 ENetHost::outgoingBandwidth

upstream bandwidth of the host

◆ packetData

enet_uint8 ENetHost::packetData[2][ENET_PROTOCOL_MAXIMUM_MTU]

◆ packetSize

size_t ENetHost::packetSize

◆ peerCount

size_t ENetHost::peerCount

number of peers allocated for this host

◆ peers

ENetPeer* ENetHost::peers

array of peers allocated for this host

◆ randomSeed

enet_uint32 ENetHost::randomSeed

◆ recalculateBandwidthLimits

int ENetHost::recalculateBandwidthLimits

◆ receivedAddress

ENetAddress ENetHost::receivedAddress

◆ receivedData

enet_uint8* ENetHost::receivedData

◆ receivedDataLength

size_t ENetHost::receivedDataLength

◆ serviceTime

enet_uint32 ENetHost::serviceTime

◆ socket

ENetSocket ENetHost::socket

◆ totalReceivedData

enet_uint32 ENetHost::totalReceivedData

total data received, user should reset to 0 as needed to prevent overflow

◆ totalReceivedPackets

enet_uint32 ENetHost::totalReceivedPackets

total UDP packets received, user should reset to 0 as needed to prevent overflow

◆ totalSentData

enet_uint32 ENetHost::totalSentData

total data sent, user should reset to 0 as needed to prevent overflow

◆ totalSentPackets

enet_uint32 ENetHost::totalSentPackets

total UDP packets sent, user should reset to 0 as needed to prevent overflow

The documentation for this struct was generated from the following file:

include/enet/enet.h

Data Fields