Generic CTLs

These macros are used with the opus_decoder_ctl and opus_encoder_ctl calls to generate a particular request. More...

Macros
#define	OPUS_RESET_STATE
	Resets the codec state to be equivalent to a freshly initialized state.
#define	OPUS_GET_FINAL_RANGE(x)
	Gets the final state of the codec's entropy coder.
#define	OPUS_GET_BANDWIDTH(x)
	Gets the encoder's configured bandpass or the decoder's last bandpass.
#define	OPUS_GET_SAMPLE_RATE(x)
	Gets the sampling rate the encoder or decoder was initialized with.
#define	OPUS_SET_PHASE_INVERSION_DISABLED(x)
	If set to 1, disables the use of phase inversion for intensity stereo, improving the quality of mono downmixes, but slightly reducing normal stereo quality.
#define	OPUS_GET_PHASE_INVERSION_DISABLED(x)
	Gets the encoder's configured phase inversion status.
#define	OPUS_GET_IN_DTX(x)
	Gets the DTX state of the encoder.

Detailed Description

These macros are used with the opus_decoder_ctl and opus_encoder_ctl calls to generate a particular request.

When called on an OpusDecoder they apply to that particular decoder instance. When called on an OpusEncoder they apply to the corresponding setting on that encoder instance, if present.

Some usage examples:

int ret;
opus_int32 pitch;
ret = opus_decoder_ctl(dec_ctx, OPUS_GET_PITCH(&pitch));
if (ret == OPUS_OK) return ret;
 
opus_encoder_ctl(enc_ctx, OPUS_RESET_STATE);
opus_decoder_ctl(dec_ctx, OPUS_RESET_STATE);
 
opus_int32 enc_bw, dec_bw;
opus_encoder_ctl(enc_ctx, OPUS_GET_BANDWIDTH(&enc_bw));
opus_decoder_ctl(dec_ctx, OPUS_GET_BANDWIDTH(&dec_bw));
if (enc_bw != dec_bw) {
  printf("packet bandwidth mismatch!\n");
}

See also

Opus Encoder, opus_decoder_ctl, opus_encoder_ctl, Decoder related CTLs, Encoder related CTLs

Macro Definition Documentation

OPUS_GET_BANDWIDTH

#define OPUS_GET_BANDWIDTH

(

x

)

Gets the encoder's configured bandpass or the decoder's last bandpass.

See also

OPUS_SET_BANDWIDTH

Parameters

[out]

x

opus_int32 *: Returns one of the following values: OPUS_AUTO (default) OPUS_BANDWIDTH_NARROWBAND 4 kHz passband OPUS_BANDWIDTH_MEDIUMBAND 6 kHz passband OPUS_BANDWIDTH_WIDEBAND 8 kHz passband OPUS_BANDWIDTH_SUPERWIDEBAND 12 kHz passband OPUS_BANDWIDTH_FULLBAND 20 kHz passband

OPUS_GET_FINAL_RANGE

#define OPUS_GET_FINAL_RANGE

(

x

)

Gets the final state of the codec's entropy coder.

This is used for testing purposes, The encoder and decoder state should be identical after coding a payload (assuming no data corruption or software bugs)

Parameters

[out]

x

opus_uint32 *: Entropy coder state

OPUS_GET_IN_DTX

#define OPUS_GET_IN_DTX

(

x

)

Gets the DTX state of the encoder.

Returns whether the last encoded frame was either a comfort noise update during DTX or not encoded because of DTX.

Parameters

[out]

x

opus_int32 *: Returns one of the following values: 0 The encoder is not in DTX. 1 The encoder is in DTX.

OPUS_GET_PHASE_INVERSION_DISABLED

#define OPUS_GET_PHASE_INVERSION_DISABLED

(

x

)

Gets the encoder's configured phase inversion status.

See also

OPUS_SET_PHASE_INVERSION_DISABLED

Parameters

[out]

x

opus_int32 *: Returns one of the following values: 0 Stereo phase inversion enabled (default). 1 Stereo phase inversion disabled.

OPUS_GET_SAMPLE_RATE

#define OPUS_GET_SAMPLE_RATE

(

x

)

Gets the sampling rate the encoder or decoder was initialized with.

This simply returns the Fs value passed to opus_encoder_init() or opus_decoder_init().

Parameters

[out]

x

opus_int32 *: Sampling rate of encoder or decoder.

OPUS_RESET_STATE

#define OPUS_RESET_STATE

Resets the codec state to be equivalent to a freshly initialized state.

This should be called when switching streams in order to prevent the back to back decoding from giving different results from one at a time decoding.

OPUS_SET_PHASE_INVERSION_DISABLED

#define OPUS_SET_PHASE_INVERSION_DISABLED

(

x

)

If set to 1, disables the use of phase inversion for intensity stereo, improving the quality of mono downmixes, but slightly reducing normal stereo quality.

Disabling phase inversion in the decoder does not comply with RFC 6716, although it does not cause any interoperability issue and is expected to become part of the Opus standard once RFC 6716 is updated by draft-ietf-codec-opus-update.

See also

OPUS_GET_PHASE_INVERSION_DISABLED

Parameters

[in]

x

opus_int32: Allowed values: 0 Enable phase inversion (default). 1 Disable phase inversion.